MFA Audi 80 B3/B4 (incl S2/RS2)

Displays up to 17 Values simultaneously

Multigauge fits as replacement for the MFA Audi 80 B3/B4 (incl S2/RS2) display

With the CANchecked displays you have all relevant engine values in view.

CANchecked has recently launched a 2.8" display with a capacitive touch on the market. The retrofit display shows up to 50 values and is suitable for all freely programmable control units with Can-Bus and many with serial interface (e.g. VEMS). In addition, it has an 8GB SD card for logging while driving. All of the 10 views can be individually assigned by the customer with widgets.
All this with a suitable adapter for the Audi 80 B3/B4 incl. S2/RS2 to integrate the display directly into the speedometer.The aim was to offer an affordable replacement display for the Audi 80 B3/B4 (inkl S2/RS2) MFA cluster.

Fits for:
- AUDI 80 B3 1986-1992
- AUDI 80 B4 1991-1996 (incl. S2/RS2)

Key Features:
- 2.8" MFA display as replacement for the Audi 80 B3/B4 (incl. S2/RS2)
- 8GB SD card memory
- 10 different display pages freely configurable
- Choice of up to 33 sensors
- Displays up to 17 sensors simultaneously
- Connection via Can-Bus and serial port (e.g. VEMS*)
- 4 analogue inputs for 0 - 5V sensors (eg oil pressure, fuel pressure, gas temperature (with adapter) and boost pressure)
- Shift Light optional
- Individual minimum and maximum warning values
- Popup function if the value exceeds or falls below values
- Screen brightness dimmable with original MFA lever
- Switching the view with the original MFA lever

Views:
- 10 views freely configurable
- Up to 17 widgets per display
- 10 different widgets (digital number, bar, speed, single pointer, log, tableswitch, image (from SD card), number, circle, Haldex)
- Widgets can be moved and resized using drag'n'drop
- Depending on widgets color matching possible

Supported ECUs:
In general, it is possible to support all ECUs that have a documented Can-Bus interface. For this, however, the manufacturer must add the Can-Bus protocol.

The following standalone engine units have already been implemented:
- trijekt (Premium, Bee, trigifant)
- Megasquirt 2 und 3
- k-data KDFI
- UMC1/UMC2
- EFIgnition
- Microsquirt
- EcuMaster EMU (classic with Can-Bus adapter: EMU Black)
- AIM generic protocol
- LinkECU
- Haltech v2
- MME ECU481 with Can Bus
- SCS Delta GDI4 and Delta
- VAG (Audi / VW / Seat)
- Van kronenburg KMS MD35 (MP25 with CAN-Bus adapter)
- VEMS with serial adapter
If your ECU is not listed, please contact us

Logging
Three different logging types are available:
1. USB: logs all sensor data live via USB
2. SD card: all sensor data are logged onto the SD card
3. debug: all CAN bus data are logged via USB
4. SDdbg: all Can Bus data are stored on the SD card (CAN Bus Logger)
The Logviewer is available online for evaluating the log. Simply load the log file and use the intuitive interface.

Software updates
Software updates can be carried out by the customer himself via the integrated MicroUSB interface. The software can be downloaded from and is very easy to use. The updater is available for Windows (32bit/64bit) as well as for Mac OSX.

What's in the box:
- CANchecked MFA28 Audi 80 B3/B4 (inkl S2/RS2)
- Cable set
- 8 GB Micro-SD card
- Micro-SD card adapater
- Quickstart Guide

Installation manuals can be found on CANchecked website

Optional Accessories
- Haldex License
- Shift light Audi 80 B3/B4 (replaces the outside temperature display)
- Serial adapter (VEMS + Ecumaster without CAN)